Le Marché [FIN] Commande groupé #2- Flash SCC PSG stereo 2MB (2Mo) Yamanooto (espagne)
Hi!
I'm out of stock at this momment. But in 2 or 3 weeks I will have 140 SCC boards in stock,and Multimapper too. I can reserve all your boards if you want,making the pay of,at least 1/3 of the total ammount.
You can trust me... more than one here have my address
I'm out of stock at this momment. But in 2 or 3 weeks I will have 140 SCC boards in stock,and Multimapper too. I can reserve all your boards if you want,making the pay of,at least 1/3 of the total ammount.
You can trust me... more than one here have my address
Bon ok mais je le décompte de ma propre commande pour ne pas perturber la comptabilité.
Maintenant c est clos pour les retardataires svp
Edité par
MSXlegend
Le 24/07/2023 à 21h05
Maintenant c est clos pour les retardataires svp
Edité par
MSXlegend
Le 24/07/2023 à 21h05
Tous mes PCB -> github.com/msxlegend
challenge 2013 -> neodream MSX 2013
Concepteur du -> KCX Bluetooth transmitter
Vous pouvez voir dans le message plus haut que notre ami Pablibiris est en rupture (comme je l avais plus ou moin prévu) un délais minimum de 3 semaines est nécessaire plus délais d envoi etc... Bref, je vous tiens informé soyez patient 
Et merci a Pablibiris pour tous ces efforts , il est très débordé et malgré ça, il fait le nécessaire pour nous livrer rapidement
Edité par
MSXlegend
Le 24/07/2023 à 21h10
Et merci a Pablibiris pour tous ces efforts , il est très débordé et malgré ça, il fait le nécessaire pour nous livrer rapidement
Edité par
MSXlegend
Le 24/07/2023 à 21h10
Tous mes PCB -> github.com/msxlegend
challenge 2013 -> neodream MSX 2013
Concepteur du -> KCX Bluetooth transmitter
MSX Legend, you can accept more orders if you want. I will have 140 boards soon
I'm not going to have stock problems to serve the cartridges for all you need (as long as you don't go over 140 cartridges hahaha!)
More cartridges = less shipping costs to all
I have ordered all the boards,pieces and cases. Now waiting to arrive
I think I already sent Yamanooto to someone here. If so, I would like you to give your opinion when you try it ,I accept constructive criticism
Edité par
Pablibiris
Le 24/07/2023 à 22h53
I'm not going to have stock problems to serve the cartridges for all you need (as long as you don't go over 140 cartridges hahaha!)
More cartridges = less shipping costs to all
I have ordered all the boards,pieces and cases. Now waiting to arrive
I think I already sent Yamanooto to someone here. If so, I would like you to give your opinion when you try it ,I accept constructive criticism
Edité par
Pablibiris
Le 24/07/2023 à 22h53
Not a big deal but they changed the delivery date at the last minute and the next time they arrived too late so I had to pick it up myself.
By the way, if you want some feedback, here it is:
- The cartridge is very well made (and well packaged).
- I'm disappointed not to have even a small piece of documentation printed on an A4 paper.
- In particular, I saw on MRC that we need the yamafx software to use it... but it isn't say anywhere where to find it! (even MRC don't have a link to that tool).
- As for the rest, I'll let you know when I've had a chance to use it.
By the way, if you want some feedback, here it is:
- The cartridge is very well made (and well packaged).
- I'm disappointed not to have even a small piece of documentation printed on an A4 paper.
- In particular, I saw on MRC that we need the yamafx software to use it... but it isn't say anywhere where to find it! (even MRC don't have a link to that tool).
- As for the rest, I'll let you know when I've had a chance to use it.
On est toujours ignorant avant de savoir.
Hi Aioneko
Oh..! I don't sent you a email with the files? My fault I send It to you NOW (Sorry!)
Oh..! I don't sent you a email with the files? My fault
I send It to you NOW (Sorry!)
pas possible désolé, c est deja commandé !
Tous mes PCB -> github.com/msxlegend
challenge 2013 -> neodream MSX 2013
Concepteur du -> KCX Bluetooth transmitter
Hi! A little update
I only need to recieve the FPGAs (I have the rest of the pieces ready). But the FPGAs are in customs
I hope will be free next week. All deppends when customs spend to leave free the packet of FPGAs. But when this happens,the build will be fast (1 week more or less).
Thanks for your patiente
I only need to recieve the FPGAs (I have the rest of the pieces ready). But the FPGAs are in customs
I hope will be free next week. All deppends when customs spend to leave free the packet of FPGAs. But when this happens,the build will be fast (1 week more or less).Thanks for your patiente
Opooly :
Bonjour,
Si encore possible, je suis preneur de KONAMI5 SCC et 1x MULTIMAPPER(ASCII16,...)
Merci!
Si encore possible, je suis preneur de KONAMI5 SCC et 1x MULTIMAPPER(ASCII16,...)
Merci!
ecoute il m a dit que ça ne posait pas de probleme, alors la suite par messagerie! mais apres je ne prend plus de commande.
IT'S CLOSED !! Edité par MSXlegend Le 05/08/2023 à 01h00
Tous mes PCB -> github.com/msxlegend
challenge 2013 -> neodream MSX 2013
Concepteur du -> KCX Bluetooth transmitter
Tous mes PCB -> github.com/msxlegend
challenge 2013 -> neodream MSX 2013
Concepteur du -> KCX Bluetooth transmitter
Les FPGA sont arrivé aujourdhui
La situation va se debloquer progressivement, encore un peu de patience
La situation va se debloquer progressivement, encore un peu de patience
Tous mes PCB -> github.com/msxlegend
challenge 2013 -> neodream MSX 2013
Concepteur du -> KCX Bluetooth transmitter
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie